Allen&Heath ICE-16D - Manual (Page 21)

Allen & Heath 21 ICE-16D User Guide
After formatting, the file structure on your USB memory device will look like this when
connected to your computer (removed from ICE and plugged into your computer):
Notes on USB memory recording file structure
RECORDING DIRECT TO USB MEMORY
The recorder.ini file stores the initialisation settings for the device. Do not modify this file!
The Music folder is where you can copy .wav files to for playlist playback, for example if you
require background music at an event or wish to listen to an individual or consecutive list
of .wav audio files.
The Records folder is where your ICE-16 recordings are stored, under sub folders Song _01
for the first recording, Song_02 for the second and so on.
The individual channel .wav files will be
named chan-01.wav to chan_16.wav.
You can copy or import these to your
DAW system for mixing and editing, or you
can play them back to the individual outputs
on the ICE-16D.
Note that the channel order in which the
files are played to the outputs is dependent
on the alpha numeric name of the file so
you can re-name the files to change the
order if you want to.
If you delete any files from a Song folder the remaining files will play in alpha-numeric order
to the outputs from output 1 but with no gap. In other words, if you deleted chan_01.wav
from the folder above and played the song on ICE-16D then chan_02 to chan_16 would play
to outputs 1 to 15.