Allen&Heath GLD-80 - Manual (Page 7)

GLD User Guide 7 AP8561 iss.4
Daisy chain connection One or more ME-1
personal mixers can connect to any GLD dSNAKE port
(dSNAKE, Expander, Monitor).
Parallel connection Each ME-1 mixer can be
connected with its own cable using a standard PoE
Ethernet switch or the Allen & Heath ME-U hub.
The GLD can interface directly with the Allen & Heath ME
Personal Mixing System to allow musicians, performers and
presenters to control their own monitor mix without using up
GLD mix buses.
Visit the Allen & Heath web site to find out more.
GLD Remote and OneMix apps for iPad
Provides remote wireless control using one or more
iPads via a wireless access point (router) connected to
the GLD Network port.
GLD Remote allows full remote live mixing control for the
engineer. GLD OneMix allows access to just one mix for
each musician to control their own personal monitor.
The apps can be downloaded from the Apple Store.
 Note that the GLD mixer firmware and app software
must be compatible.
ME-1 Personal Mixer
ME-U 10-port PoE Hub
Uses external power supplies
Can be powered over the Cat5 cables (PoE)