AirLive WP-201G - Manual (Page 116)

“Pass Job When Error Occurred” is for you to set the
interval time for bypassing the current printing job in order
to avoid the printing job is not printed completely while the
printer is interrupted unexpectedly because of paper out or
off line.
8.4.5 SNMP
The print server supports SNMP configuration. If it is
enabled, please set up the following parameters.
SNMP System Contact: You can enter the print server
administrator’s contact information here. This information
will be displayed in the SNMP management tool.
SNMP System Location: You can enter the installed
location of the print server here. This information will be
displayed in the SNMP management tool.
108 AirLive WP-201G User’s Manual