AirLive WP-201G - Manual (Page 107)

8.4.2 Wireless
If you want to use the print server through wireless LAN,
please set up the print server through Ethernet first and
make sure your wireless LAN setting is correct. After
setting the wireless LAN, unplug the Ethernet cable and
restart the print server, then you can start to use the print
server through wireless LAN. If the wireless configuration
does not work, please plug the Ethernet cable again, restart
the print server and configure the print server through
Ethernet until the wireless LAN settings are correct.
8.4.2.1 General Setting
You can enable/disable the wireless function and set
parameters that are used for the wireless stations to connect
to this print server from here. The parameters include
“Function”, “Mode”, “ESSID” and “Channel Number”. You
can manually set the parameters of wireless LAN in this
page or use the “Site Survey” function to automatically
search for an available access point and associate with it.
99 AirLive WP-201G User’s Manual