AirLive WN-360USB - Manual (Page 52)

47 WN-360USB User’s Manual
2.7.2 WPS Setup - PIN
If the wireless access point you wish to connect supports PIN, please follow the following instructions
to establish connection to it:
1. Right-click the AirLive configuration utility icon located at lower-right corner of computer desktop
and then click ‘Launch Config Utility’.
2. Click ‘WPS Configuration’ menu, and the following settings will appear.
3. The PIN code of your wireless network card is an eight-digit number located at the upper-right
position of configuration utility. Remember it, and input the number to your wireless access point
as the WPS PIN code (Please refer to the user manual of your wireless access point for
instructions about how to do this).
4. Click ‘PIN’ button now, and wait for few seconds to one minute. If a wireless access point with
correct PIN code is found, you’ll be
connected to that access point.
5. You may have to click ‘PIN’ for few more times to try again. If you still can not connect to access
NOTE: If you experienced problem with the pin code provided here, you can click ‘Renew’
to get a new pin code.