AirLive WN-360USB - Manual (Page 30)

25 WN-360USB User’s Manual
To set authentication / encryption information for the access point. Please click ‘Auth. \ Encry.’ tab:
Here are descriptions of every setup item:
Item Name Description
Authentication Select the authentication type of the wireless access point or wireless device
you wish to connect. When you’re adding a profile from an existing access
point or wireless device, authentication type will be selected automatically, and
please do not change it.
If you select ‘LEAP’, you’ll be prompted to input LEAD specific settings:
Please input LEAP identity, password, domain name, and select encryption
type. You can check ‘Show Password’ box so the password you inputted will be
displayed as you type, but not replace by asterisk.
Encryption Select the encryption type of the wireless access point or wireless device you
wish to connect. When you’re adding a profile from an existing access point or
wireless device, the encryption type will be selected automatically, and please
do not modify it.
WPA Preshared
Key
Input WPA preshared key here. If encryption is not enabled, or you select
‘WEP’ as encryption type, this field will be disabled and grayed out.
WEP Key You can select key type (Hexadecimal or ASCII) and input WEP key here. If