AirLive WN-360USB - Manual (Page 23)

WN-360USB User’s Manual 18
And here are descriptions of every setup item in setup area:
Item Name Description
Sorted by >> You can decide how to sort all listed access point by ‘SSID’,
‘Channel’, or ‘Signal’ (signal strength).
Show dBm Check this box to show the signal strength of access point,
instead of percentage.
Rescan Click this button to rescan access points. You can click this
button for several times, if the access point you wish to use does
not show in the list.
Add to Profile You can store a specific access point to profile, so you can link to
that access point directly next time, without inputting
authentication key again.
To add an access point to profile, you have to select an access
point from the list first, then click ‘Add to Profile’ button. Detailed
instructions will be given below.
Connect Connect to a selected access point. You have to select an
access point from the list first and then click ‘Connect’ to connect
to the selected access point.