AirLive WN-360USB User Manual

Page 21

WN-360USB User’s Manual 16

Scan result includes 6 types of information, they are:

The SSID (Service Set Identifier) of wireless device. If nothing is displayed here, it means

the SSID of this wireless device is hidden.

If a

symbol appears in front of the name of wireless device, means you’ve established

connected with that wireless device.

The type of this wireless device and the channel number of this wireless device.

Means this wireless device is an access point

Means this wireless device is a computer (Ad-Hoc mode, point-to-point connection)

The wireless standard supported by this access point is displayed here.

‘n’ for 802.11n

, ‘g; for 802.11g

, and ‘b’ for 802.11b

WPS icon

will appear when the access point supports WPS. If the access point uses

encryption, a key icon

will appear.

Note: When the access point supports WPS and WPS icon

is appeared, you will not see the

key icon

here even through the access point uses encryption.

D Shows the signal strength of access point by percentage.

Shows the bar graph of the signal strength.

If you can not see the access point you wish to connect here, please click ‘Rescan’ button to scan

for access point again, until the one you preferred is displayed. You may have to click ‘Rescan’

for more than two times before you can see the access point you wish to use here.

If you still can not see the access point you wish to use after clicking ‘Rescan’ for more than five

times, please move your computer closer to the location where the wireless access point is, or

see instructions in Chapter 3-2 ‘Troubleshooting’.

A B