AirLive WL-2000CAM - Manual (Page 40)

AirLive WL-2000CAM User’s Manual
37
Carry out the following steps：
1. Click On to Motion Detection 1 choose one of eight orders.
2. A detecting zone 1 appears and use mouse to adjust and move the zone boundaries and
position.
3. Use tool bar to set Threshold and Sensitivity value.
4. Follow the steps to set the other Motion Detection.
5. Click the OK to save the setting.
Note：
• Be careful! Motion Detection function don’t work with Patrol function at same time.
6-2-6 System Log
The System Log function allows users to review any changes and events happened. The system starts
logging automatically after started.
Remote Log: Enables user to send the log data to a specified log server.