AirLive WHP-1130 - Manual (Page 38)

Assign a station as a trap server by entering its IP address. Right-click on a blank in
the list and click Edit address.
To remove a trap server from the list, right-click it and click Clear address. Click
Clear all address to remove all assigned trap servers from the list (Figure 22).
Figure 22. Trap Server panel — Clear all Address function
Trap View
To view trap log information, click the Start Trap View icon (a ringing telephone) in
the upper left corner of the main WLAN Management System window. A window
such as that shown below will appear (Figure 23).
Outdoor Bridge/Outdoor Bridge Solution 28