Config window – bridge mode panel, Igure, Ridge – AirLive WHP-1130 User Manual
Page 33: Oint to, Oint, Ultipoint
Config Window – Bridge Mode Panel
Figure 16. Bridge Mode – Point to Point
Point to Point
Each bridge has to know its peer bridge’s MAC address. For example, if Bridge A is
to connect with Bridge B, then Bridge B’s MAC address must be entered on this
page for Bridge A, and Bridge A’s MAC address must be entered here for Bridge B.
Figure 17. Bridge Mode – Point to Multipoint
Point to Multipoint
Outdoor Bridge/Outdoor Bridge Solution
23