AirLive WHP-1130 - Manual (Page 32)

Transmission
Rate Sets the transmission rate at which data packets are
transmitted by the outdoor bridge. In
high-interference environments
, a lower rate can
increase overall transmission speed by reducing
resends of lost packets.
Basic Rates
This value determines the basic rates used and
reported by the outdoor bridge. The highest rate
specified is the rate that the outdoor bridge will use
when transmitting broadcast/multicast and
management frames. Available options are:
• 1, 2 Mbps
• All (1, 2, 5.5, and 11) Mbps
Channel
Number You can change the channel number from here.
Wireless outdoor bridges that will be in
communication with each other must be set to use
the same channel in order to be able to establish a
wireless link or links.
Regulatory
Domain Identifies the country where the outdoor bridge is
used. Each country has defined its available channel
numbers and transmission power
Important:
In a multiple cell network topology, overlapping and/or adjacent cells using different
channels can operate simultaneously without interference if the difference between
the center frequencies is at least 30 MHz. For example, channels 1, 7, and 13 are
non-overlapping frequency channels.
Outdoor Bridge/Outdoor Bridge Solution 22