AirLive WHP-1130 - Manual (Page 17)

How to Use this Guide
This user’s guide gives complete instructions for installation and use of the Outdoor
Bridge.
Outdoor Bridge is supplied with factory set default network settings. Use the
WLAN Management System tool to change the default settings before introducing a
new bridge to an already-established wireless network.
The WLAN Management System is a simple-to-use, yet extremely powerful,
SNMP-based utility for online central configuration and network management from
a remote station on the same subnet. A trap management program is also provided to
monitor/diagnose the Outdoor Bridge.
Read through the next section ‘Planning the Network’, in order to get the best
possible performance from the 11-Mbps wireless network.
Step 1: Plan the wireless network See “ Planning the Network ,” for details.
Step 2: Pre-configure the
outdoor bridge before
installing it into an
existing Ethernet
network
See “ Hardware Configuration ,” for details.
Step 3: Install the outdoor bridge
into the Ethernet
network
See “ Installing the WLAN Management
System ,” for details.
Step 4: Make online
configuration and
manage the outdoor
bridge via the WLAN
Management System
utility
See “ Using the WLAN Management System ,”
for details.
Outdoor Bridge/Outdoor Bridge Solution 7