AirLive VoIP-400 Series - Manual (Page 26)

ITG User’s Guide
This command can show the desired TCID setting of ITG, value is from 0 to 1 for 2 ports ITG
and 0 to 3 for 4 ports ITG. Please refer the appendix C to find the factory default setting.
Please Back To Main Menu
Please select Main Menu\Configure System Settings
System Config. Settings Function Briefings
1.IP Settings, which allows one to set the gateway's IP address, its subnet mask, and its Default
Gateway IP address.
2.H.323 Parameter Settings, which allows one to set the H.323 parameters, such as Fast Start
Mode, Gatekeeper Mode, etc.
3.Port Parameter Settings, which allows one to set parameters associated with each port, such as
transmission/receive gains, comfort noise level, etc.
4.Voice Coder Selection, which allows one to set the desired coder type, such as G.711, G.723 or
G.729A, in a per line module base.
5.DHCP Settings, which allows one to set the status of DHCP
6.PPPoE Settings, which allows one to set the status of PPPoE
7.Dynamic DNS Settings, which allows one to set the status of Dynamic DNS
26 Configuring ITG from a Web Browser