AirLive IAS-2000 v2 User Manual
Page 95
IAS-2000 v2
User’s Manual
.
88
Rule Item: This is the rule selected.
Rule Name: The rule name can be changed here.
Enable this Rule: After checking this function, the rule will be enabled.
Action: There are two options, Block and Pass. Block is to prevent packets from passing and
Pass is to permit packets passing.
Protocol: There are three protocols to select, TCP, UDP and ICMP, or choose ALL to use all three
protocols.
Source MAC Address: The MAC address of the source IP address. This is for specific MAC
address filter.
Source/Destination Interface: There are five interfaces to choose, ALL, WAN1, WAN2, LAN1 and
LAN2.
Source/Destination IP: Enter the source and destination IP addresses.
Source/Destination Subnet Mask: Enter the source and destination subnet masks.