AirLive IAS-2000 v2 - Manual (Page 60)

IAS-2000 v2
User’s Manual
. 53
5.2.2 Privilege List
There are two parts, Privilege IP Address List and Privilege MAC Address List, need to be set.
y
Privilege IP Address List
If there are some workstations belonging to the managed server that need to access the network without
authentication, and enter the IP addresses of these workstations in this list. The “Remark” blank is not
necessary but is useful to keep track. IAS-2000 v2 allows 100 privilege IP addresses at most. These settings will
become effective immediately after clicking Apply.
Warning: Permitting specific IP addresses to have network access rights without going through standard
authentication process at the authenticated LAN may cause security problems.