AirLive IAS-2000 v2 - Manual (Page 148)

IAS-2000 v2
User’s Manual
141
Appendix A. External Network Access
If all the steps are set properly, IAS-2000 v2 can be further connected to the managed network to experience the
controlled network access environment. Firstly, connect an end-user device to the network at IAS-2000 v2’s LAN1
and set to obtain an IP address automatically. After the network address is obtained at the user end, open an
Internet browser and link to any website. Then, the default logon webpage will appear in the Internet browser.
1. First, connect a user-end device to LAN1 port of IAS-2000
v2, and set the dynamical access network. After the user
end obtains the network address, please open an Internet
browser and the default login webpage will appear on the
Internet browser.
Key in the username and password created in the local
user account or the on-demand user account in the
interface and then click Submit button. Here, we key in
the local user account (e.g. jacky for the username and
1234 for the password) to connect the network.
2. Login page appearing means IAS-2000 v2 has been
installed and configured successfully. Now, a client can
browse the network or surf the Internet!
3. But if “Sorry, this feature is available for on-demand or
PMS user only.” appears, it means a wrong button has
been clicked. “Remaining” is only for on-demand users.
Please click the Submit button instead.
.