Chapter 5. web interface configuration, Chapter 5, Web interface configuration – AirLive IAS-2000 v2 User Manual
Page 23
IAS-2000 v2
User’s Manual
.
16
Chapter 5. Web Interface Configuration
This chapter will present further detailed settings. The following table shows all the functions of IAS-2000 v2.
OPTION
System
Configuration
Network
Configuration
User
Authentication
Utilities Status
Configuration
Wizard
Network Address
Translation
Authentication
Configuration
Change Password
System Status
System
Information
Privilege List
Policy
Configuration
Backup/Restore
Setting
Interface Status
WAN1
Configuration
Monitor IP List
Black List
Configuration
Firmware Upgrade
Current Users
WAN2 & Failover
Walled Garden
List
Guest User
Configuration
Restart Traffic
History
LAN1
Configuration
Proxy Server
Properties
Additional
Configuration
Notification
Configuration
LAN2
Configuration
Dynamic DNS
Online Report
FUNCTION
IP
Mobility
Caution: After finishing the configuration of the settings, please click Apply and pay attention to see if a restart
message appears on the screen. If such message appears, system must be restarted to allow the settings to take
effect. All on-line users will be disconnected during restart.
After the basic installation shown previously has been completed, IAS-2000 v2 can be further configured with the
following steps
1.
Use the network cable of the 10/100BaseT to connect a PC to the Private Port, and then start a browser (such
as Microsoft IE). Next, enter the gateway address for that port, the default is
. In the
opened webpage, an administrative login page will appear. Enter “admin” as the default username and
password “airlive”. Click Enter to log in.