AirLive GW-300R - Manual (Page 75)

Appendices and Index
AirLive GW-300R User’s Manual 71
DUT
Configuration:
Enable DHCP serv
AN setting: static IP address.
168.1.254/24.
.
et RADIUS server shared key.
nd 802.1X setting.
The following test will use the inbuilt 802.1X authentication method such as ,EAP_TLS,
PEAP_CHAPv2(Windows XP with SP1 only), and PEAP_TLS(Windows XP with SP1 only)
using the Smart Card or other Certificate of the Windows XP Professional.
3. DUT and Windows 2000 Radius Server Setup
Setup Windows 2000 RADIUS Server
We have to change authentication method to MD5_Challenge or using smart
card or other certificate on RADIUS server according to the test condition.
Setup DUT
Enable the 802.1X (check the “Enable checkbox“).
e hared key. (The key shared by the RADIUS server and DUT).
e test
dapter on PC
e the IEEE802.1X as the authentication method. (Fig 2)
t service pack 1. If users upgrade to
y
w Protected EAP (PEAP) option.
se a certificate on this computer. (Fig 3)
2
er.
W
LAN IP address: 192.
Set RADIUS server IP
S
Configure WEP key a
Enter the RADIUS server IP.
Enter th s
We will change 802.1X encryption key length to fit the variabl
condition.
Setup Network a
1.Choos
Note.
Figure 2 is a setting picture of Windows XP withou
service pack 1, then they can’t see MD5-Challenge from EAP type list any more, but the
will get a ne
Choose MD5-Challenge or Smart Card or other Certificate as the EAP
type.
3.If choosing use smart card or the certificate as the EAP type, we select to
u