AirLive GW-300R - Manual (Page 54)

3. Making Configuration
AirLive GW-300R User’s Manual 50
deny the clients, whose MAC addresses are not in the "Control table"
(please see below), to connect to this device.
Association control
Check "Association control" to enable the
controlling of which wireless client can
associate to the wireless LAN. If a client is
denied to associate to the wireless LAN, it
means the client can't send or receive any data
via this device. Choose "allow" or "deny" to
allow or deny the clients, whose MAC
addresses are not in the "Control table", to
associate to the wireless LAN.
Control table
"Control table" is the table at the bottom of the "MAC Address Control" page. Each row of
MAC Address MAC address indicates a specific
client.
this table indicates the MAC address and the expected IP address mapping of a client.
There are four columns in this table:
IP Address Expected IP address of the
y
't care its IP address.
corresponding client. Keep it empt
if you don
C When "Connection control" is
cked, check "C" will allow the
onding client to connect to
vice.
che
corresp
this de
A When "Association control" is
, check "A" will allow the
rresponding client to associate
ireless LAN.
checked
co
to the w