AirLive GW-300R - Manual (Page 65)

3. Making Configuration
AirLive GW-300R User’s Manual 61
3.3.4.5 Routing
Routing Tables allow you to determine which physical interface address to use for outgoi
IP data grams. If you
ng
have more than one routers and subnets, you will need to enable
llow packets to find proper routing path and allow different subnets to
ttings are settings used to setup the functions of static.
rotocol (RIP) will exchange information about destinations for
se select RIPv1 if you need this protocol.
e
estination IP address, subnet mask, gateway, hop for each routing rule, and then enable
r disable the rule by checking or unchecking the Enable checkbox.
routing table to a
communicate with each other.
Routing Table se
Dynamic Routing
Routing Information P
computing routes throughout the network. Please select RIPv2 only if you have different
subnet in your network.
Otherwise, plea
Static Routing: For static routing, you can specify up to 8 routing rules. You can enter th
d
o