AirLive GW-300R - Manual (Page 27)

3. Making Configuration
AirLive GW-300R User’s Manual 23
PPP over Ethernet: Some ISPs require the use of PPPoE to connect to their
services. PPPoE Account and Password: the account and password your ISP assigned to
you. For security, this field appears blank. If you don't want to change the password, leave
it empty. PPPoE Service Name: optional. Input the service name if your ISP requires it.
Otherwise, leave it blank.
Maximum Idle Time: the amount of time of inactivity before disconnecting your PPPoE
session.
Set it to zero or enable Auto-reconnect to disable this feature.
Maximum Transmission Unit (MTU): Most ISP offers MTU value to users. The most
common MTU value is 1492.
Connection Control: There are 3 modes to select:
Connect-on-demand: The device will link up with ISP when the clients send outgoing
packets.
Auto-Reconnect(Always-on):The device will link with ISP until the connection is
established.
Manually : The device will not make the link until someone clicks the connect-button in the
Staus-page.