AirLive GW-300R User Manual
Page 45
3. Making Configuration
AirLive GW-300R User’s Manual
41
or source or destination IP address, you can define a single IP address (4.3.2.1) or a
rts
0, U53,
d Packet Filter click the check box next to Enable in the Inbound Packet
u have SMTP Server (25), POP Server (110), Web Server (80), FTP Server
F
range of IP addresses (4.3.2.1-4.3.2.254). An empty implies all IP addresses.
For source or destination port, you can define a single port (80) or a range of po
(1000-1999). Add prefix "T" or "U" to specify TCP or UDP protocol. For example, T8
U2000-2999. No prefix indicates both TCP and UDP are defined. An empty implies all port
addresses. Packet Filter can work with Scheduling Rules, and give user more flexibility on
Access control. For Detail, please refer to Scheduling Rule.
Each rule can be enabled or disabled individually.
Inbound Filter:
To enable Inboun
Filter field.
Suppose yo
(21), and News Server (119) defined in Virtual Server or DMZ Host.
Example 1:
.2.3.100-1.2.3.149) Remote hosts are allow to send mail (port 25), and browse the
) Remote hosts can do everything (block nothing)
(1
Internet (port 80)
(1.2.3.10-1.2.3.20
Others are all blocked.