AirLive CoreNVR 9 - Manual (Page 50)

9. Remote Viewing on IE
AirLive CoreNVR 9/16 User’s Manual 44
※ Note : All settings in IE are as the same as in the CoreNVR system, please refer to
the previous chapter 4, 5, 6 and 7 for detail settings.
Audio Volume Control: Click to switch between normal and mute.
Schedule Monitor: Click button to enable or disable Schedule monitoring,
the recording will be stopped if it is disabled.
Two Way Audio: Click button to start or stop selected channel two-way
audio.
PTZ Control:
Move PTZ camera direction by click direction buttons.
Click to make camera return home position.
Move the thumb to left to make slower, move to right to make move faster.
Tour: Select a tour setting from combo box, and click “go” button to start tour, click “Stop”
button to stop tour.
Preset: Select a preset
position from the box, camera
will move to preset position after click.
IRIS: Adjust camera’s IRIS
setting, or set it to auto.
Focus: Adjust camera’s focus
setting, or set it to auto.
Zoom: Zoom-in or zoom-out
focus camera.
Pan: Begin camera auto pan or
stop.