AirLive CoreNVR 9 - Manual (Page 23)

4. System Setting
AirLive CoreNVR 9/16 User’s Manual 17
4.4 System Setting
4.4.1 Device Info
Model Name: Display Model Name.
Device Title: Key-in device title here.
Software version: Display current firmware version.
4.4.2 Date Time Info
Current Time: Display current time.
Server Date & Time: Display current system date-time.
Adjust:
Manual:
Click setting to approach date-time setting dialog, and select current date and time
now, click “OK” to change system time or click “Cancel” button to abort
configuration.
Synchronize with NTP:
Enable synchronize date-time with NTP service.
NTP Server:
Key-in NTP server IP or domain name, if you use the domain name to connect NTP
server, the DNS service must be enabled.
NTP Sync Interval:
Select time period to synchronization with NTP service.
Time Zone: Select the time zone of NVR location.
Daylight saving: Enable or disable daylight saving mode.
Daylight saving Start Time: Configure daylight saving start time, it works with daylight
saving mode enabled.