AirLive CamPro HD - Manual (Page 66)

2. Main-console
AirLive CamPro HD User’s Manual
61
DI Detection:
When system time reach the schedule begin time and DI alarm is triggered,
system will start recording work immediately and continually until the system time
is over the post-alarm seconds.
If the pre-alarm seconds is set, when motion detection has been triggered, the
recorded file will include pre-alarm seconds by setting.
2.6.11 Record Setting:
When set to Motion detection or DI detection
record mode, user can set the Pre-Alarm second(s)
which the recorded file will keep a slice of image
defined as the setting second(s) before event was
triggered.
Set the Post-Alarm second(s) which the recorded file will keep a slice of image
defined as the setting second(s) after the event was triggered.
2.6.12 Motion Configuration
Motion detect area:
Default button:
Select the full image for motion detection.