AirLive Air4G User Manual
Page 36
3. Making Configuration
AirLive Air4G User’s Manual 31
D. PPP over Ethernet
1. Activate WWAN for Auto-Failover: With this function enabled, when the Ethernet
WAN connection is broken, the device will automatically activate the WWAN
connection and keep you connected to internet with the alternative WWAN
broadband service. Meanwhile, if the device detected that the Ethernet WAN
connection is recovered, your broadband connection will be switched to use the
Ethernet WAN service
2. PPPoE Account and Password: The account and password your ISP assigned to
you. For security, this field appears blank. If you don't want to change the password,
leave it blank.
3. Connection Control: There are 3 modes to select:
(1) Connect-on-demand: The device will link up with ISP when the clients send
outgoing packets.