AirLive Air4G - Manual (Page 34)

3. Making Configuration
AirLive Air4G User’s Manual 29
15. LCP Echo Request: Enter the time interval and the maximum failure count. The
device will constantly send out the LCP packets for keeping the connection alive.
16. Ping Remote Host: Enter the Remote host IP and the time interval to send the ping
packets for keeping the connection alive.
B. Static IP Address:
1. Activate WWAN for Auto-Failover: With this function enabled, when the Ethernet
WAN connection is broken, the device will automatically activate the WWAN
connection and keep you connected to internet with the alternative WWAN
broadband service. Meanwhile, if the device detected that the Ethernet WAN
connection is recovered, your broadband connection will be switched to use the
Ethernet WAN service.
2. WAN IP Address, Subnet Mask, Gateway, Primary and Secondary DNS: Enter
the proper settings provided by your ISP.