AiM Yamaha R6 - Manual (Page 4)

MXL Plug&Play kit for Yamaha R1 2004/2005/2006 – R6 2004/2005/
User manual
Release 1.01
3
www.aim-sportline.com
0
Introduction
MXL Plug&Play kit for Yamaha R1/R6 is the dash (with data acquisition in Pista version)
designed and developed for an easy and quick installation: with the minimum effort it will
be possible to connect directly to the bike ECU and visualize (with no need of additional
sensors):
• RPM
• Speed
• Water temperature
• Air temperature
Through the bike stock sensor it will be possible to sample:
• Oil level
• Fuel level
• Turning lights signal
• High beam signal
• Neutral signal)
• Battery charge level
MXL
, like the stock dash is powered by the bike master switch.
MXL Strada , Pista kits for Yamaha here described have been developed for the following
bike models:
Model Year 2004 Year 2005 Year 2006
R1
9 9 9
R6
9 9 z
9 = supported
z = non supported
Note : thanks to the infrared transmitter/receiver (included in kit MXL Pista kit, optional to
MXL Strada kit), lap times will be shown/recorded. MXL Pista, moreover, allows to
manage and record data coming from 5 external configurable channels (potentiometers
suspensions, throttle sensor, brake pressure sensor, etc…).
MXL Plug&Play for Yamaha R1 2004/2005/2006 and Yamaha R6 2004/2005 has three
different operating mode:
• Running mode: is the standard mode that shows and, if connected to an MXL
Pista records, data out coming from the engine and diagnosis codes;
• Setting mode: this mode allows to set some engine parameters. Setting mode
allows to modify the ECU mapping.
• Diagnostic mode: this mode allows to manage ECU problems and errors.
For what not expressly explained in this tutorial refer to MXL and/or Race Studio
Configuration
user manuals.