AiM Yamaha R6 - Manual (Page 20)

MXL Plug&Play kit for Yamaha R1 2004/2005/2006 – R6 2004/2005/
User manual
Release 1.01
19
www.aim-sportline.com
6
Chapter 5 – Calibration, gear calculation, configuration, data
download and analysis
MXL
Strada/ Pista can show on the display the engaged gear.
At first start up MXL starts gear calibration and shows “RUNNING GEAR CAL” on the
display bottom string.
Warning
• For MXL to show engaged gear it is necessary to perform “Gear calibration
procedure”. Refer to Race Studio configuration user manual to know how to
do it.
• In case crown/pinion ratio has been changed a new calibration and a new
gear calculation is to be done.
• Refer to Race Studio Configuration user manual for further information
concerning gear sensor calibration and gear calculation.
MXL
can be configured only using a PC and Race Studio 2 software (included in the kit).
To connect MXL to the PC use the proper USB cable included in the kit.
For any further information concerning Race Studio 2 software installation and
functionalities refer to the related user manual.
When a test session is over it is possible to download stored data (MXL Pista only) and
save them in the database integrated in Race Studio 2 software.
For further information concerning data download refer to Race Studio Configuration
user manual.