AiM Yamaha R6 - Manual (Page 15)

MXL Plug&Play kit for Yamaha R1 2004/2005/2006 – R6 2004/2005/
User manual
Release 1.01
14
www.aim-sportline.com
1 5
4.2.2 – Setting mode with YEC ECU kit
In case of a bike equipped with ECU YEC kit it is possible to modify both injection and
ignition parameters. It is also always possible to come back to the default configuration. As
shown on the injection map, it is possible to have richer or leaner air/fuel mixtures in nine
different points of the map.
In the below table characteristics of each point of the map are explained.
Map point Characteristics Description Value
1 TPS<25 RPM<3.000 Modifies the quantity
of fuel injected in
point “1” of the map. Correction ±25% of
the value in the map
2 TPS<25 RPM>3.000 Modifies the quantity
of fuel injected in
point “2” of the map. Correction ±25% of
the value in the map
3 25≤TPS≤90 ALLRPM Modifies the quantity
of fuel injected in
point “3” of the map. Correction ±25% of
the value in the map
4 TPS>90 RPM<9.000 Modifies the quantity
of fuel injected in
point “4” of the map. Correction ±25% of
the value in the map
5 TPS>90 9.000≤RPM≤10.000 Modifies the quantity
of fuel injected in
point “5” of the map. Correction ±25% of
the value in the map
6 TPS>90 10.000≤RPM≤11.000 Modifies the quantity
of fuel injected in
point “6” of the map.
Correction ±25% of
the value in the map
7 TPS>90 11.000≤RPM≤12.000 Modifies the quantity
of fuel injected in
point “7” of the map.
Correction ±25% of
the value in the map
8 TPS>90 12.000≤RPM≤13.000 Modifies the quantity
of fuel injected in
point “8” of the map.
Correction ±25% of
the value in the map
9 TPS>90 RPM>13.000 Modifies the quantity
of fuel injected in
point “9” of the map. Correction ±25% of
the value in the map
Growing the value the mixture will be richer.