AiM MyChron Expansion - Manual (Page 12)

MyChron Expansion
User Manual
Release 1.02
11
www.aim-sportline.com
3
Chapter 4 – How to install and configure speed sensors
There are two types of available speed sensors: front wheel speed sensor and rear axle
speed sensor. Here below the installation instructions.
1 1
4.1 – Installing the front wheel speed sensor
Front wheel speed sensor (above on the left) has to be oriented as shown above on the
right, at 5 mm distance from the magnet.
1 2
4.2 – Installing the rear axle speed sensor
Rear axle speed sensor shown here above on the left fits an installation on the bearing
housing of the axle and can also be provided with a magnetic ring. It is to be installed at 3-
5 mm from the magnet (or magnetic ring).