A2Z Ozone Bed Sterilizer - Manual (Page 7)

7
switch
“ON”. It will enter into the whole sterilization procedure. The
progressing time of each stage is Default. The Default as following:
1. 1 channel is switched on
Vacuum: 5 min
Ozone generating: 18 min
Ozone-maintain: 20 min
Ozone decomposition: 6 min
2. 2 channels are switched on
Vacuum: 8 min
Ozone generating: 25 min
Ozone-maintain: 20 min
Ozone decomposition: 9 min
3. 3 channels are switched on
Vacuum: 10 min
Ozone generating: 30 min
Ozone-maintain: 20 min
Ozone decomposition: 12 min
NOTES:
 If you are not satisfied with the Default Ozone generating time, you could adjust
time (1-99 min) by press the relevant
“ ”
, before switch
“ON” on thin film.