2N VoiceBlue MAX v1.3 User Manual
Page 53

53
CLIR – fill in this parameter to define whether or not the called subscriber should
be displayed the calling SIM card telephone number. It is recommended that the
telephone number of the SIM card inserted in the GSM module should not be
displayed to the called subscriber to avoid problems with CallBack from GSM.
Maximum count of called minutes – set the maximum count of minutes to be
used via the SIM card per month.
Count of SMS messages – set the maximum count of SMS messages to be sent
via the SIM card per month.
Day to restore call limit and delete statistics – set the day in a month on which
the statistics of the
a
Maximum count of called minutes
Count of SMS
parameters should be deleted
messages
.
First count – set the length of the first pulse after which the pulse counting will
be changed as set in the
parameter
Next count
.
Next count – set the length of one pulse in seconds after the time as defined in
the
parameter elapses
First count
.
Day limit of called minutes – set the maximum count of minutes to be called via
the SIM card per day.
Time limits
Define the SIM card use time limits for the GSM group.
– use this function to assign up to four independent free minute counters
Call tariffs
to each GSM module (SIM card) group:
Tariff 1 = free minutes for calls to own GSM/UMTS network
Tariff 2 = free minutes for calls to other GSM/UMTS networks
Tariff 3 = free minutes for calls to the PSTN
Tariff 4 = free minutes for calls within a closed user group (VPN).
Note
Check the GSM/UMTS searching priorities on the SIM card using your
mobile phone before enabling roaming.
Caution
Calls via a roaming network may increase you telephone bill!
Caution
The
and
enable services must be
Temporary CLIP
Temporary CLIR
supported by the GSM/UMTS provider. If not, not, the provider's network
may reject the call!
Note
A correct setting of the
and
parameters
First count
Next count
guarantees a correct counting of remaining minutes on SIM cards. These
parameters help limit outgoing calls according to free minutes. The CDR
includes real data.