Lcr table – 2N VoiceBlue MAX v1.5 User Manual

Page 58

Basic settings

GSM network ID – name the prefix list for convenience.
Default count of digits – the default length of the number to be dialled into
GSM/UMTS when routing via the selected prefix list. Use this parameter if the

parameter is not included in the

Count of digits

Table of accepted prefixes

Table of replaced prefixes

This table helps you change the prefix of the number received (from 00 to +, e.g.). You
can just add or remove a prefix using this table. This change is performed before the
prefix table search is initiated. Keep the „"/ „" record at least in the table for a proper
function.

Table of accepted prefixes

A list of prefixes of called destinations to which the selected prefix list applies.

LCR Table

The LCR (Least Cost Routing) table helps route calls according to the called number
and depending on the day time and weekday.

Prefix list – select a list of prefixes to be used for the selected LCR row.
Time limitation – set a time limitation for a particular LCR row.
Weekend usage – enable/disable a particular PCR row during weekends.
Maximum call length – set the maximum length (in minutes) for an active
outgoing call to GSM/UMTS.
Groups – set the GSM outgoing groups to be used for the selected LCR row.

Fallback port (9): set the fallback port. If the fallback port service is
unavailable, the next LCR table row is applied. Select the appropriate

Note

The number to be dialled to the GSM/UMTS network must meet the

condition.

Count of digits
For

calls, the count of digits to be dialled must be equal to or higher

VoIP

than the value set in the

Count of digits

For calls via the

interface, the

defines the maximum

FXS

Count of digits

count of the digits to be dialled.

Note

The maximum count of records in the

is 14

Table of replaced prefixes

for each prefixlist.
The maximum table record size is 9 characters for the prefix and 9
characters for the replaced number.

Note

The maximum count of records in the

is 138

Table of accepted prefixes

for each prefixlist.
The maximum table record size is 9 characters.