2N Helios IP Configuration Manual v2.8.1 - Manual (Page 7)

7
2N TELEKOMUNIKACE a.s., www.2n.cz
®
Firmware Update
We also recommend you to update your intercom firmware upon the first login to the
intercom. Refer to
for the latest firmware version. Press the www.2n.cz Update
button in the menu to upload firmware. The Firmware System Maintenance /
intercom will get restarted upon upload and only then the updating process will be
complete. The process takes about 30 seconds.
SIP Server Connection Setting
Set the following parameters in the menu to allow your Services Phone SIP / /
intercom make calls and be accessible within your VoIP infrastructure.
– set the name to be displayed as CLIP on the called party's Display name
phone, in the login window and on the web interface start page.
– set the intercom phone number (or another unique ID Phone number (ID)
composed of characters and digits) to identify the intercom uniquely in calls and
registration.
– set the domain name of the service with which the intercom is Domain
registered. Typically, it is equivalent to the SIP Proxy or Registrar address. If you
do not use a SIP Proxy in your intercom installation, enter the intercom IP
address.
If you use a SIP server (Proxy, Registrar), set the addresses for the following network
elements: