2N Mobility Extension Application - Manual (Page 6)

2N TELEKOMUNIKACE a.s., Modranska 621,143 01 Praha 4
Phone: +420 261 301 500, Fax: +420 261 301 599, e-mail:
[email protected]
Tested telephones
Currently the following phones have been tested:
N73, N78, N82, N91, N92,N93, N93i, N95, N96,
E50, E51, E60, E61, E61i, E65, E66, E70, E71 a E90
An up-to-date list can be found at
www.2n.cz .
Advanced settings
Advanced settings can be made in the afore-mentioned Aina.bin file. The file has these parameters:
PBX +420739586586 – Access number (mostly SIM) in your PBX.
PBX2 +420739586587 – Access number in case the SIM is busy. You can define up to 8 numbers.
PBXSMS +420739586587 – Access number for SMS (for services).
SMSProfiles - if this flag is 0 or empty, the application will send services codes to the PBX by dialing to a
ME gateway number and sending the setting using DTMF codes.
If this flag is set, (SMSProfiles 1) the application will change services using SMS messages.
SMSCode *61 – Service code for „Set presence“.
CodeDial – this code is sent to the PBX before the actual phone number to be dialled when a call
is dialled via the PBX. This code may be empty.
PopupOnlyforPbxNumbers 1 – application runing on background. If the calls comes from any number
defined in PBX…PBX8 – it automatically appears. If the settings is 0 – application appears with every
incoming call.
CodeMobileExtOn *55 – Service code for „Ring at call to user“.
CodeMobileExtOff #55 – Service code for „Don’t ring at call to user“.
CodeUCDExt *64 – Service code for „Bundle station login“.
CodeUCDUsr *65 – Service code for „Bundle user login“.
CodeUCDExtOff #64 – Service code for „Bundle station logout“.
CodeUCDUsrOff #65 – Service code for „Bundle user logout“.
CodeTfrImmed *11 – Service code for „Forward user - unconditional“.