2N Omega 48 - Operator Services v1.0 - Manual (Page 28)

2N
®
- OMEGA 48
Operator services
Users Manual - Operator services
www.2n.cz
27
2.13. Dispatcher Calling, Baby Calling
Using this service you can automatically call a selected subscriber line or a CO line
subscriber number by picking up the handset of your telephone set only. To activate
this service:
Pick up the handset and wait until you can hear the internal dialing
tone (————)
With a tone telephone set:
Dial ‘#77’.
r...r
or
nn
Dial:
•
‘0’ and then the required CO line subscriber number r...r, or
•
the required PBX memory number (80xx), or
•
the required internal subscriber number nn, or
•
the operator’s number (‘9’), or
•
the required department number (10, 20, 30, 40, 50, 60),
to select the line that will be called upon off-hook.
Press ‘FLASH’ or ‘R’ on your telephone set.
With a pulse telephone set:
Dial ‘777’.
r...r
or
nn
Dial:
•
‘0’ and then the required CO line subscriber number r...r, or
•
the required PBX memory number (80xx), or
•
the required internal subscriber number nn, or
•
the operator’s number (‘9’), or
•
the required department number (10, 20, 30, 40, 50, 60),
to select the line that will be called upon off-hook.
Further, in either case:
Listen to the service performing message.
Hang up.
In order that other numbers can be dialed from such a telephone set, this automatic
calling is not activated until a set pause expires (6 seconds, e.g.). If you start dialing
a number during this pause, you can make a normal call.