2N Analogue UMTS gateway 2N EasyGate UMTS USB - Quick Start - Manual (Page 5)

13) Click with right mouse button on any marked item and choose Actualize the software driver. The
window as in part 6) should display. Skip to part 6). Actualize the drivers for all three marked items.
Following this procedure You should install all three hardware items described in part 10).
Modem configuration
After successful modem installing it is needed to configure the modem accordance with Your
operator or internet provider. If You have manual, CD or other information from Your operator or ISP
about modem configuration use primarily these materials
14) Open the window Control panels‐>Modem and telephone settings‐>Modems, choose Telit HSDPA
USB Modem and click “Properties“.
15) On card “Advanced” fill the extra initialization command according with Your mobile operator or
ISP. For O2 CZ and other operators the following command is working properly:
at+cgdcont=1,"IP","internet","",0,0
Then click OK button.
Internet connection
After properly modem configuration You can create new internet connection and start using
EasyGate UMTS Data. If You have manual, CD or other information from Your operator or ISP about
modem configuration use primarily these materials
16)Choose Control panels‐>Network Connections‐>Create a new connection.