Echo WT24 Owners Manual - Manual (Page 18)

WHEELED TRIMMER
14
SERVICE & MAINTENANCE
BEFORE INSPECTING OR SERVICING ANY PART OF THIS MACHINE, SHUT OFF POWER SOURCE,
DISCONNECT SPARK PLUG WIRE FROM SPARK PLUG AND MAKE SURE ALL MOVING PARTS HAVE COME TO A COMPLETE STOP.
WARNING
Figure 5.15
Figure 5.16
1
2
3
4
7
8
9
10
11
12
13
14
15
5
6
2. Position the handlebars so the machine can be laid
back and supported on blocks as shown in Figure
5.15
3. Remove mow ball (1), disk head (2), spacers (3), and
spindle spacer (4). See Section 5.3 cutting head ad-
justment for mow ball removal.
Note: To release spindle spacer, gently tap on spacer to
remove from spindle shaft.
Figure 5.17
Figure 5.18
4. Remove the six 5/16 x 3/4" bolts (9), washers and
nuts around the front of the trimmer and two 5/16 x
1" bolts (11) from each side of the trimmer as shown
in Figures 5.17 & 5.18.