Echo LS21 Owners Manual v.2 - Manual (Page 15)

11 LOG SPLITTER
ENGLISH
4.6 sToraGe moDe
The log splitter can be adjusted for storing in tight spaces.
Perform the following steps to transform the machine into
storage mode:
1. Turn the engine off.
2. Flip the main beam into vertical position (see
Section 4.5).
3. Remove the hitch pin from the hitch channel and hitch
tube. Flip the hitch tube into vertical position.
4. Secure the hitch tube in the upright position by installing
the hitch pin in the hole below the 3/8" hitch bolt and
through hitch tube.
1. When towing, always connect the safety chains. Make
sure trailer hitch bolts are tight.
2. Extend log splitter ram all the way before towing to help
maintain stability (see picture below).
3. Towing speed must not exceed 45 mph (72 kph).
4. Make sure the jack stand is in the uP position during
towing. Place the jack stand on a level surface and
secure it in the DOWN position before using.
4.7 TowInG THe loG sPlITTer
Correct towing configuration with ram extended and stand up
When splitting logs in the vertical position, stablize the log
before engaging the control. Split as follows:
1. Place log on the end plate and turn until it leans against
the beam and is stable.
2. When splitting extra large or uneven logs, the log must
be stablized with wooden shims or split wood between
the log and end plate or ground.