Echo 76624 Owners Manual v.3 - Manual (Page 19)

17 6 INCH CHIPPER
OPERATION
allow the machine to come to complete stop before
inspection or servicing.
Warning
4.8 feed roller conTrol bar
feed roller control bar is used to manually control the
direction of the feed roller rotation.
Move the feed roller bar to FoRWaRd (F) when you
want the chipper to feed materials towards the chipper
blades.
Move the feed roller bar to ReveRSe (R) when you
want the chipper to reverse its action and push mate-
rials back out of the feed chute (when materials be-
come jammed).
Move the feed roller bar to StoP to halt the rotation
of the feed roller.
safety bar (s & f models only) activates when it has
been pushed (in the event of an emergency). once it is
activated, the feed roller automatically stops. Push the re-
set/override button to resume forward feed.
•
•
•
R
REVERSE
R F
FORWARD
STOP
REVERSE
Reset/Override Button
(S&F Models only)
Safety Bar
Activated (S&F
Models only) Feed Roller
Control Bar
Safety Bar
(S&F Models
only)
4.9 sToPPing The chiPPer
Move throttle to slowest position.
Move chipper engagement uP to the engine start
position.
let machine idle for a few seconds.
turn key to off position.
allow machine to come to a complete stop.
1.
2.
3.
4.
5.