Echo 77412 Owners Manual v.1 - Manual (Page 14)

Page 12 4.5" BearCat Chipper Operator's Manual
3.1 CONTROLS
1. Engine: Refer to Engine Operator's Manual.
2. Fuel Tank: Use unleaded fuel only. DO NOT MIX OIL
AND GASOLINE.
3. Trailer Hitch: Always use a 2" ball (50mm for S Mod-
els) and hook safety chains to towing vehicle.
4. Drive Belts and Shield: Never remove shields when in
use.
5. Chipper Chute: Feed materials to be chipped through
the chute.
Section
Controls
3
6. Disk Cover: Used to access the chipping disk for ser-
vice and maintenance.
7. Battery: Models 77412, 77412S only.
8. Chipper Engagement Lever: Used to engage the drive
belt. Moving the lever to the chipping position engages
the drive belt. Moving the lever to the start position re-
leases tension on the drive belt.
9. Adjustable Chipping Anvil: Check bolts for 75 Ft-lb.
torque every 8 hours.
Figure 3.1 - Chipper Controls
Chipper Chute
Extension
(S models only)
Chipper Chute
Chipping Anvil
Disk Cover
Wheels
Drive Belts and
Belt Guard
Hitch
Engine
Fuel Tank
Battery
Chipper Deflector
Chipper Engagement Lever
Axle
Trailer