Echo CH4540 Owners Manual v.2 - Manual (Page 15)

4 INCH CHIPPER 11
ENGLISH
FEATURES AND CONTROLS
3.2 pTo modEL CoNTRoLS
Three point hitch connection 1. : Mounts chipper to
tractor three point hitch.
pTo driveline
2. : Connects chipper to tractor pto
shaft. Avoid driveline angles over 20 degrees on PTO
when unit is in use. NOTE: Minimum and maximum
telescoping on the PTO driveline are 18.11" and 24.49".
This will leave a 6.43" overlap. See Section 2.10 for
instructions on checking driveline length.
belt guard
3. : never remove shield while machine is
running.
1
2
6
4
5
7
3
Chipper chute 4. : Feed materials to be chipped through
the chipper chute.
Leg stands
5. : never move machine unless the 3 point
is lifted and legs clear the ground.
discharge tube
6. : Chipped materials exit through the
rotatable discharge chute.
Rotor shaft bearing cover
7. : Covers rotor shaft and
bearing.