Echo CH4540 Owners Manual v.2 - Manual (Page 14)

4 INCH CHIPPER 10
3.1.1 CHIppER CoNTRoLS
Trailer 1. hitch: Always use 2 inch (50 mm) ball and
safety chains.
Jack stand
2. : Always have in uP position and clear from
ground when moving. When in use, place in DOWN
position on a level surface.
belt guard
3. : never remove guards when in use.
discharge tube 4. : Chipped materials exit through the
rotatable discharge chute.
Chipper chute
5. : Feed materials to be chipped through
the chipper chute.
Rotor shaft bearing cover
6. : Covers rotor shaft and
front bearing.
belt engagement pedal
7. : When the pedal is depressed,
the drive belt is disengaged. When the pedal is
released, the drive belt is engaged. Depress pedal to
start engine.
3.1 ENGINE modEL CoNTRoLS
Section
FEaTuRES & CoNTRoLS 3
1
2
3
4
5
6
7
3.1.2 HoNda ENGINE CoN-
TRoLS
Engine 1. throttle: Changes engine
speed. Turn knob clockwise for
full throttle operation. Turn knob
counterclockwise for engine idle.
Turn knob fully counterclockwise
to shut engine off. Refer to
engine manual for further engine
operating instructions.
Engine choke
2. : use when starting
a cold engine. pull to on position
when starting. push lever to oFF
position when engine is running.
key switch
3. : turn to start engine.
Do not crank starter for more than
ten seconds or damage could
result.