2 engine controls – Echo 72620 User Manual
Page 13
6 INCH CHIPPER
9
FEATURES AND CONTROLS
3.2 engine conTrols
engine throttle
1.
: Changes engine speed. turn
knob clockwise for full throttle operation. Turn knob
counterclockwise for idle on warm up. Turn knob fully
counterclockwise to shut engine off. Refer to engine
manual for further engine operating instructions.
engine choke
2.
: use when starting a cold engine. Pull to
oN position when starting. Push lever to off position
when engine is running. Refer to engine manual for
further engine operating instruction.
Key switch
3.
: located on engine case. Release switch
as soon as engine is running. Do not crank starter for
more than ten seconds or damage could result.
noTe
For more detailed engine information, see the engine
owners manual provided with the chipper.
belt shield: Remove to access belts. Never run the chipper
without the belt shield in place.
battery box: Holds the battery.
hydraulic oil tank: (Model CH6614H only) Check level
of hydraulic oil before each use.
BELT
SHIELD
HYDRAULIC OIL
TANK
TURNTABLE
FOOT PEDAL
MANUAL
HOLDER
BATTERY
BOX
TRAILER HITCH
manual holder: Conveniently holds your owner's and
parts manuals.
Trailer hitch: Always use 2 inch ball and safety chains.
Turntable foot pedal: use to pivot the machine on the
trailer.