Echo CH611DH Owners Manual v.3 - Manual (Page 27)

23 6 INCH CHIPPER
ENGLISH
TROUBLESHOOTING
7.1 SpECIaL ToRQuE REQuIREmENTS
SpECIFICaTIoNS
7
Section
SpECIaL ToRQuE REQuIREmENTS
LoCaTIoN oN maCHINE HaRDWaRE DESCRIpTIoN ToRQuE (uNIFIED INCH)
ON CHIPPER DISK, BlADE MOuNTINg CAP
SCREWS
M16 X 2.0 X 30 HEX HD W/
PAtCh
140 ft-LbS
Rotor will not turn.
drive belt too loose or broken. Replace belt or spring.
obstructed discharge. use branch or similar object to clear discharge.
Plugged rotor. Clear rotor. Feed material more evenly.
Cannot engage clutch.
Improper belt installation; belt
not under belt guide.
Install belt properly; install belt under belt guide.
Improper belt tension. Adjust belt tension. Replace belt or spring if needed.
Excessive belt wear.
Not using correct belt.
Contact your nearest authorized dealer to order the correct belt for
your chipper.
Pulley(s) damaged or worn. Replace pulley(s).
Pulley(s) not in alignment. Align pulley(s) with straight edge.
Belt(s) tension too loose. Replace belt or spring.
Trailer sways during
towing.
tire air pressure not correct Check tire sidewall for inflation limits.