JLG R6 - Manual (Page 66)

SECTION 5 - GENERAL SPECIFICATIONS AND MAINTENANCE
5-6 – JLG Lift – 3121684
5.4 LUBRICATION
Lubrication Capacities
Hydraulic Oil
NOTE: Aside from JLG recommendations, it is not advisable to
mix oils of different brands or types, as they may not con-
tain the same required additives or be of comparable vis-
cosities.
Lubrication Specifications
Table 5-8. Capacities
COMPONENT R6
Hydraulic Reservoir 5 L (1.32 Gal.)
Hydraulic System
(Including
Reservoir )
7 L (1.85 Gal.)
Table 5-9. Hydraulic Oil
HYDRAULIC SYSTEM OPERATING
TEMPERATURE RANGE
SAE VISCOSITY GRADE
-18° C to -5° C (0° F to +23° F) 10W
-18° C to + 99° C (0° F to 210° F) 10W-20, 10W-30
+10° C to +99° C (50° F to 210° F) 20W-20
Table 5-10. Lubrication Specifications
KEY SPECIFICATIONS
MPG Multipurpose Grease having a minimum dripping point of 350° F. Excel-
lent water resistance and adhesive qualities, and being of extreme pres-
sure type. (Timken OK 40 pounds minimum.)
EPGL Extreme Pressure Gear Lube (oil) meeting API service classification GL-5 or
MIL-Spec MIL-L-2105.
HO JLG Recommends - Mobil DTE 10 EXCEL 15
ATF - Automatic Transmission Fluid
Mobil EAL ENVIRONSYN H 32
Mobil EAL HYDRAULIC OIL 32