JLG 4017RS Operator Manual - Manual (Page 86)

Section 5 - Attachments
5-6 31200938
Sample Capacity Chart
Note: This is a sample capacity chart only! DO NOT use this chart, use the one located in your
operator cab.
WARNING
TIP OVER HAZARD. All loads shown on rated capacity chart are based on machine
being on firm ground with frame level (see page 4-5 or 4-8); the forks being positioned
evenly on carriage; the load being centered on forks; proper size tires being properly
inflated; and the telehandler being in good operating condition.
XXX xx MAX
-
XXX xx
XXX xx
XXXX
XXXX XXXX
XX
XX
XX
XX
XX
XX
XX
o 10
o 20
o 30
o 40
o 50
o 60
o 75
o 0
XX
XX
XX
XX
XX
XX
XX
XX
XX
XX XX XX XX XX XX XX XX XX XX
XXX mm
XXXX
XXXX
XXXX
XXXX
XXXX
XXXX
XXXX
XXXX
A
B
C
D
OAM1801
This Capacity Chart may be used with this model ONLY.
The telehandler model is indicated on the boom or chassis. Model
XXXX is used for demonstration purposes only.
Boom Extension
Indicator (arc)
Boom Angle
Load zones indicate the
maximum weight that may
be safely lifted.
Load center must be
equal to or less than
value shown.
Attachment type,
weight and
dimensions must be
equal to or less than
the data shown.