Transmission control lever (if equipped), Transmission control lever (if equipped) -8, Warning – JLG 4017RS Operator Manual User Manual

Page 44

Section 3 - Controls and Indicators

3-8

31200938

Transmission Control Lever (if equipped)

Direction of Travel Selection

Transmission control lever (1) engages forward or reverse travel.

• Push lever forward for forward travel; pull lever rearward for reverse travel. Move lever

to centered position for neutral.

• Forward or reverse travel can be selected while in any gear.

• When traveling in reverse, the back-up alarm will automatically sound.

• Drive in reverse and turn only at slow rates of speed.

• If clutch lock is activated do not increase engine speed with the transmission in

forward or reverse and the service brake depressed in an attempt to get quicker
hydraulic performances. This could cause unexpected machine movement.

WARNING

TIP OVER/CRUSH HAZARD. Bring telehandler to a complete stop before shifting
transmission control lever. A sudden change in direction of travel could reduce
stability and/or cause load to shift or fall.

OZ4131

This manual is related to the following products:

3614RS Operator Manual